Technical data - Audio

Audio systems / Technical data - Audio

HU-415
Output: 4 x 25 W
Impedance: 4 Ohm.

Voltage required: 12 V, negative ground Radio
Frequency: U (FM) 87.5 - 108 Mhz M (AM) 522 - 1611 kHz
L (AM) 153 - 279 kHz
HU-615
Output: 4 x 25 W
Impedance: 4 Ohm.

Voltage required: 12 V, negative ground

Radio
Frequency: U (FM) 87.5 - 108 Mhz M (AM) 522 - 1611 kHz
L (AM) 153 - 279 kHz
Changing radio tuning modes The radio tuning mode can be changed from "US" to "AUS" (for areas where it is possible to listen to
stations broadcast from outside the U.S.). to change modes: 1. Switch the radio off.

2. Push and hold the MEM knob, and press the POWER button.

3. Press the MEM knob to select the desired tuning mode (US or AUS) 4. Turn the MEM knob to "Back and save" 5. Press the MEM knob to save the setting.

Alarm
"Alarm!" is displayed when an alarm message is sent. The function is used to warn the driver of serious accidents or catastrophes, collapsed bridges, earthquakes or nuclear accidents for example.

Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation.

"Dolby" and the double D symbol are trademarks of Dolby
Laboratories Licensing Corporations.