Volvo S40 & V40 Manual
Cruise controlInstruments, switches and controls / Cruise control
Cruise control
The cruise control switches are located on the turn signal lever. The indicator light on the instrument panel ( see page 21) will come on when cruise control is engaged.
To engage and set the desired speed: 1. Set switch (B) to ON.
2. Accelerate to the desired cruise speed.
3. Press the + or - area of the SET button (A) to set the desired speed.
NOTE: The cruise control cannot be engaged at speeds below 22 mph (35 km).
Braking
This will automatically disengage the cruise control. The previously selected
cruise speed is retained in
the memory and by momentarily setting the switch to the RESUME position, that
speed will be
reengaged.
If the cruise control is already engaged, the cruising speed can be increased or
decreased by depressing
the SET button (A) towards either + or -. One short press on the button
corresponds to a speed change of
approx. 1.5 mph (2.0 km/h). When the button is released, the vehicle will
maintain the current speed.
If the actual speed falls below 70% of the set speed or if the wheels spin or lock, the cruise control will disengage automatically.
Note: When driving up steep hills with the cruise control engaged, the
transmission may shift
intermittently. You can avoid this by manually selecting a lower gear.
Acceleration
Momentary acceleration, such as for passing, does not interrupt cruise control
operation. The previously
selected speed will be maintained without having to set the switch to RESUME.
To disengage the cruise control system: 1) Set switch (B) to OFF, depress the brake pedal or move the gear selector to position N.
Or
2) Switching off the starting (ignition) switch will automatically disengage the
cruise control system.
Or
3) If the switch B is pressed briefly to the right. (Tip off function)
WARNING!
The cruise control should not be used in heavy traffic or when driving on wet or
slippery roads. Do
not use or resume cruise control in reverse gear.
NOTE: When the ignition is switched off, any information stored in the cruise
control memory is
erased.






