Replacing bulbs

In case of an emergency / Replacing bulbs

Remove cover

Removing high/low beam headlight bulbs · Your car is fitted with separate high and low beam bulbs.

· Switch off the lights and remove the ignition key.

· Open the hood.

· Pull off the rubber cover from the rear of the bulb unit to be replaced.

· Release the retaining spring and withdraw the connector/bulb from the headlight unit. Pull the bulb out of the connector.

NOTE: Never touch the glass of a bulb with your fingers: this could leave traces of grease or oil on the
glass which then evaporate and may damage the reflector.